Clyde Frame 4
These units can be rated at the standard, which is 3,000 lbs. @ 220 fpm on a full drum to 8,000 lbs. @ 25 fpm on the first layer. Line speeds and line pull can be engineered to meet the specific requirements of your application anywhere between the given parameters of the machines. Drum diameter is 10 inches, drum length is 20 inches and flange diameter is 21 & 1/2 inches. The drums will spool 3,300 feet of 3/8 inch wire rope, 1,900 feet of 1/2 inch rope and 1,200 feet of 5/8 inch wire rope. These units are available with manual or air controls and the power system for these units can be diesel, gas, electric with hydraulic or air and may be equipped with a torque converter, transmission or a clutch.
Clyde Frame 5
One, Two & Three Drum Units Available
These units can be rated anywhere within the following parameters: 4,500 lbs. @ 250 fpm on a full drum to 13,500 lbs. @ 35 fpm on the first layer. Static holding power is 45,900 pounds. Drum diameter is 12 & 1/2 inches, drum length is 24 inches and flange diameter is 28 inches. The drums will spool up to 3,950 feet of 1/2 inch wire rope, 2,500 feet of 5/8 inch rope and 1,750 feet of 3/4 inch wire rope. These units are available with manual or air controls and the power system for these units can be diesel, gas, electric with hydraulic or air and may be equipped with a torque converter, transmission or a clutch.
Clyde Frame 6
One, Two & Three Drum Units Available
These units can be rated from 5,000 lbs. @ 350 fpm on a full drum to 18,000 lbs. @ 50 fpm on the first layer. Static holding power is 59,000 pounds. Drum diameter is 15 inches, drum length is 27 inches and flange diameters are 22 or 34 inches. The drums will spool up to 2,900 feet of 3/4 inch wire rope, 2,150 feet of 7/8 inch rope and 1,600 feet of 1 inch wire rope. The 2-drum units with third drum attachments have wide brake bands. The two single-drum units have wide brake bands and the 2-drum unit has narrow brake bands. These units are available with manual or air controls and the power system for these units can be diesel, gas, electric with hydraulic or air and may be equipped with a torque converter, transmission or a clutch.
Clyde Frame 7
One, Two & Three Drum Units Available
These units are rated at 7,500 lbs. @ 350 fpm on a full drum to 25,000 lbs. @ 50 fpm on the first layer. Static holding power is 66,000 pounds. Drum diameters are 26 or 17 & 1/2 inches, drum length is 30 inches and flange diameter is 40 inches. The drums will spool up to 4,500 feet of 3/4 inch wire rope, 3,300 feet of 7/8 inch rope and 2,500 feet of 1 inch wire rope. The two single-drum units have 26" drums, the two 2-drum units have oversize drums. These units are available with manual or air controls and the power system for these units can be diesel, gas, electric with hydraulic or air and may be equipped with a torque converter, transmission or a clutch.
Clyde Frame 8-E hoist
Available with 2, 3 or 4 drums
This unit can be rated from 12,500 lbs. @ 400 fpm to 35,000 lbs. @ 50 fpm with a static holding power of 88,000 pounds. Drum diameter is 20", drum length: 42", flange diameter: 48". The spooling capacity is 2,125 feet of 1 & 1/2" cable, 3,030 feet of 1 & 1/4" cable, 3,800 feet of 1 & 1/8", 4,775 feet of 1" or 6,150' of 7/8" wire rope. This unit is offered as a 2, 3 or 4 drum machine. Powered by a Detroit 8-71 diesel with an 11,000 series Twin Disc torque converter, the Clyde Frame 8-E is a workhorse. The unit has manual controls on all functions and is equipped for tower or spud and anchor work. This is a rental-only machine.
Clyde Frame 8-N
Two Drum Units
These narrow drum units are the perfect spud - anchor winches. The units can develop a line pull of up to 50,000 lbs. on the first layer The drums are 22" wide, 20" diameter with 48" flanges, which allows for extreme line pull at low speed. The units are equipped with guide sheaves for low wire discharge as well as front and rear discharge. Units are capable of spooling up to 3,225 feet of 7/8", 2,500 feet of 1", 2,000 feet of 1 & 1/8" and 1,590 feet of 1 & 1/4" wire rope. The units are powered by Detroit 4-71 engines with 10,000 series Twin Disc torque converters, complete air controlled operation with remote operation capability.
Clyde Frame 8
Two & Three Drum Units
These units are bull dogs and will serve your winching and hoisting needs well. Please contact us for specifications.
Clyde Frame 12
Three Drum Unit
This unit is rated at 42,000 lbs. @ 200 fpm to 21,000 lbs. @ 400 fpm. Drum diameter is 30", drum length: 40", flange diameter: 69". The spooling capacity is 9,225 feet of 1" cable. For extremely rugged hoisting duty, this is the hoist you need. We have just received this machine. This is a rental-only unit. It is currently on rent and unavailable.
American 50-B Hoist
This machine offers a capacity of 5,000 pounds of line pull on the second layer of cable. Spooling capacity of each drum is 2,141 feet of 3/8", 1,475 feet of 7/16" or 1,218 feet of 1/2" per drum.
American 55 Hoist
This machine offers a capacity of 5,500 pounds of line pull. It is powered by a new Ford 300 gasoline engine with a PTO clutch.
American 70-B Hoist
These machines offer a capacity of 7,000 pounds of line pull on the second layer of cable. Spooling capacity of each drum up to 1,635 feet of 1/2", 1,200 feet of 5/8" or 980 feet of 9/16" per drum. One machine is currently powered by an Eimco air motor. The units can be powered by air, gas or diesel. They have manual frictions and brakes and have air controlled forward and reverse.
American 75 Hoist
This machine offers a capacity of 7,500 pounds of line pull on the second layer of cable with a line speed of up to 400 feet per minute. Drum diameter is 14", length is 24" and flange diameter is 24 inches. Spooling capacity of each drum is 1,717 feet of 5/8" or 1,142 feet of 3/4" wire rope per drum.
American 90-B Hoist
These machines offer a capacity of 9,000 pounds of line pull on the second layer of cable. Spooling capacity of each drum is 2,312 feet of 9/16", 1,743 feet of 5/8" or 1,206 feet of 3/4" wire rope per drum. One unit is currently powered by a Detroit 3-53 engine with an Allison torque converter. These units are available with manual or air controls and the power system for these units can be diesel, gas, electric with hydraulic or air and may be equipped with a torque converter, transmission or a clutch.
American 100 Hoist
This machine offers a capacity of 10,000 pounds of line pull on the second layer of cable. Drum diameter is 16", length is 26" and flange diameter is 28 inches. Spooling capacity of each drum is 1,590 feet of 3/4", 1,244 feet of 7/8" wire rope per drum.
American 120-B Hoist
These machines offer a capacity of 12,000 pounds of line pull on the second layer of cable. Spooling capacity of each drum is 2,620 feet of 5/8", 1,884 feet of 3/4" wire rope per drum.
American 140 Hoist
This machine offers a capacity of 14,000 pounds of line pull on the second layer of cable. Spooling capacity of each drum is 2,620 feet of 5/8", 1,884 feet of 3/4" wire rope per drum. Overall dimensions of the unit are 16' long X 8', 6" wide X 8' in height.
American 180 Hoist
These powerful machines are rated at 18,000 lbs of single line pull. The drum diameter is 18", drum length: 33", flange diameter: 32". The hoists will store 1,800 feet of 1" cable and have a working capacity of 1,300 feet of 1" cable. This hoists are powered by Detroit 4-71 diesels and are ready to go to work for you. These machine are rental-only units.
American 250 Hoist
Two Drum Unit with third drum attachment
Forth drum available for parts
This machine offers a capacity of 25,000 pounds of line pull on the second layer of cable at 250 feet per minute. Spooling capacity of each drum is 2,000 feet of 1", 1,650 feet of 1 & 1/8" or 1,300 feet of 1 & 1/4" wire rope per drum.
American 250SE Hoist
Two Drum Unit
This machine offers a capacity of 25,000 pounds of line pull. These units are available with manual or air controls and the power system for these units can be diesel, gas, electric with hydraulic or air and may be equipped with a torque converter, transmission or a clutch.
American 480 Hoist
Three-Drum Unit
Three drum flatbed hoist with a split third drum, powered by a 12-71 Detroit diesel with Twin Disc torque converter
American 1000 Hoist
One- and Two-Drum Units
Two double-drum units & one single-drum unit available. Call for additional information.
SKAGIT RB-90 Winch
Skagit model RB-90W double-drum winch
Spooling Capacity:
5,370’ of 1” cable
3,420’ of 1-1/4”
cable
2,400’ of 1-1/2”
cable
Beebe
Various models in stock. Please call for current availability.
Hyster
Model D6 winch. Please call for additional information.
Ingersoll-Rand
Air Tuggers
Various models in stock. Please call for current availability.
Joy
Four units available
Model JHAL-60 with a rated capacity of 11,000 pounds of line pull on first layer to 7,000 pounds of line pull at 1/2 full drum at 50 feet per minute. Unit weighs 1,200 pounds and will spool 3,550 feet of 1/2" cable, 2,100 feet of 5/8" cable or 1,575 feet of 3/4" cable. Without motors.
LeTourneau
One Drum Unit
Model W-1500 with a 50,000 pounds line pull rating at 20 feet per minute. Winch has a 130,000 brake capacity and will spool 3,000 feet of 1 & 1/4" wire rope. Drum diameter is 30.47" X 61.25" long with a flange depth of 9.75 inches. Winch is powered by a 440 volt, 60 cycle, 3-phase AC power unit. The weight of the winch is 15,000 pounds. The winch is powered by a LeTourneau squirrel cage induction type AC motor driven through an oil-bath gear train. The brakes are electro-magnetically controlled, spring-loaded, multiple disc on a drive motor and multiple-disc, manually controlled on the cable drum. The controls are two "deadman" buttons for operation in either direction and a manually operated lever for free spooling of the drum.
Lidgerwood
Two Drum Unit
Unit has a 79.1 worm reducer and magnetic controls mounted on the base. Winch will spool 3,400 feet of 1" wire rope with 4" of flange remaining. Line speed is approximately 45 feet per minute.
Lucker Pulling Grips
These linear grips are rated for up to 3" wire rope and 400,000 pound line pull capacity.
Lummus
Two Drum Unit
This unit is electric-hydraulic powered. It has a single line pull of 6,500 feet per minute on the first layer, 5,300 feet per minute on the forth layer and 3,500 feet per minute on the ninth layer. The simultaneous line pull is 1/2 of the single line pull. Line speed on a bare drum on 0 to 87 feet per minute, on the second layer the line speed is 0 to 110 feet per minute and the average drum line speed is 0 to 130 feet per minute. The diameter of the drum is 6" X 19 & 1/2" long with a 4 & 3/4 flange depth. Weight of the hoist is 3,800 pounds without wire rope. Overall length of the hoist is 72" X 46" wide and it is 60" high.
New England Trawler
One Drum Unit
This is a constant tension mooring winch, model X1761. Winch will spool 400' of 1 & 1/8" wire rope. The unit is rated at 30,000 pounds of line pull at 10 feet per minute and 36,000 pounds of line pull at stall. The maximum line speed is 20 feet per minute.
Stroudsberg
Two Drum Unit
The unit has a 30" diameter drum X 24" length with a 14" flange depth. Winch will spool 2,453 feet of 1 & 1/8" wire rope. Bare drum line pull is 29,100 pounds at 150 feet per minute, 25,500 pounds on the third layer at 171 feet per minute, 21,400 pounds on the sixth layer at 204 feet per minute and 18,500 pounds on the ninth layer at 236 feet per minute.
Timberland
Two Drum Unit
This model HR-5 has a rated capacity of 15,000 pounds of line pull @ 50 fpm. The hoist has a 16" diameter drum X 30" length with a 37" flange. This hoist has a 5" brake face and a mechanical 24" diameter clutch with a 3" face. The hoist will spool 3,530 feet of 5/8" wire rope, 2,450 feet of 3/4" wire rope or 1,920 feet of 7/8" wire rope. This machine can be set up for anchor or spud service.
Timberland
One Drum Unit
This model HR-6 hoist has a maximum line pull rating of 14,000 pounds of line pull on the second layer at approximately 400 feet per minute or 12,000 pounds of line pull on second layer using 3/4" wire rope at 400 feet per minute.
Timberland
Two Drum Unit
This is a model HR-60 with a rated capacity of 6,000 pounds of line pull on second layer using 1/2" wire rope at approximately 240 feet per minute. The hoist has an 8" diameter drum X 20" length with a 24 & 1/2" flange. The hoist will spool 2,240 feet of 1/2" wire rope or 1,440 feet of 5/8" wire rope. The approximate weight of this unit is 2,500 pounds without power.
